everytime i need something for nix mic92 already built it 1. https://github.com/Mic92/tribuchet 2. https://github.com/Mic92/nix-grpc-store… rbe but for nix

Mic92/tribuchet

Source: https://github.com/Mic92/tribuchet

Tribuchet

Remote build execution for Nix, built on the experimental external-builders feature. A hub next to the nix-daemon hands builds to remote workers. Workers run them in their own sandboxes and stream logs and outputs back to the waiting nix build.

Status: experimental. It depends on Nix’s experimental external-builders feature (plus a small patch for uid-range builds). Protocol and configuration may still change.

Why not --builders / the SSH build hook?

The classic remote build protocol needs SSH reachability into every builder and Nix installed there, and it copies closures without any scheduling. Tribuchet receives the complete build environment from Nix and owns transfer, scheduling and execution itself.

Features

• Workers dial the hub over gRPC with mutual TLS, so they can sit behind NAT. They register the systems and features they serve.
• Hub scheduling with per-system queues and capability matching (kvm, uid-range, big-parallel, …). Identical submissions share one build.
• Inputs and outputs travel as content-defined chunks, and only the chunks the other side lacks. No store-path rewriting.
• Builds survive hub and worker restarts and reloads, so deploys don’t kill in-flight builds. A build is cancelled when its nix build goes away.
• Sandboxing equivalent to Nix’s own: Linux namespaces with per-build cgroup limits, macOS Seatbelt under per-build users. Adds uid-range builds and cross-system user-mode emulation.
• Fixed-output derivations get network through presto-pasta, an embedded user-mode NAT, in an otherwise isolated network namespace. An optional allow/deny flow policy (fod-network) filters destinations.
• Live build logs across reloads and restarts, with max-log-size, max-silent-time and timeout enforcement.
• NixOS and nix-darwin modules for both services, and an OCI worker image for hosts without Nix.

Getting started

Tribuchet is one binary with four subcommands: hub, worker, attach (the shim Nix execs) and ca.

1. Certificates

Workers authenticate to the hub with client certificates from a private CA:

$ tribuchet ca init   --dir ./ca
$ tribuchet ca issue hub     --dir ./ca   # SAN must match the hub address workers dial
$ tribuchet ca issue worker  --dir ./ca   # one per worker

The hub reads hub.crt, hub.key and ca.crt from <config-dir>/ca (default /etc/tribuchet/ca). Each worker gets ca.crt plus its own key pair (default /var/lib/tribuchet/tls/).

Alternatively set auth = "tailscale" on both sides to skip TLS. The worker dials http://<hub-tailnet-name>:7437. The hub looks each peer up in tailscaled’s LocalAPI, rejects anything not on the tailnet, and uses the node name as the worker identity. Restrict registration to ACL tags with tailscale-allowed-tags = ["tag:tribuchet-worker"].

2. Hub (on the machine running nix-daemon)

/etc/tribuchet/hub.toml:

socket = "/run/tribuchet/hub.sock"   # for tribuchet attach
listen = "0.0.0.0:7437"              # for workers
config-dir = "/etc/tribuchet"

Point Nix at the attach shim in nix.conf:

experimental-features = external-builders
external-builders = [{"systems":["x86_64-linux","aarch64-linux"],"program":"/path/to/tribuchet-attach"}]

where tribuchet-attach is a wrapper script:

#!/bin/sh
exec tribuchet attach "$1" --socket /run/tribuchet/hub.sock

3. Workers

A worker needs its own nix-daemon. Inputs are imported through it and held by temp roots against garbage collection. The worker runs unprivileged and leases each build to a per-uid agent service (set up by the NixOS and nix-darwin modules) that owns the builder process and its uid block.

/etc/tribuchet/worker.toml:

hub = "https://hub.example.org:7437"
max-jobs = 4
max-log-size = 67108864

[emulate]
aarch64-linux = "/path/to/static/qemu-aarch64"

$ tribuchet worker --config /etc/tribuchet/worker.toml

Hub and worker each keep a chunk cache under XDG_CACHE_HOME/tribuchet, 10 GiB by default. A warm worker only receives chunks it does not hold. Tune with chunk-cache-bytes (hub) and chunk-store-bytes (worker). The cache can be deleted while the process is stopped.

All options for both files are documented in crates/tribuchet/src/config.rs.

The worker’s TLS paths can be overridden with TRIBUCHET_CA_CERT, TRIBUCHET_CERT and TRIBUCHET_KEY, e.g. to point at a key delivered by systemd LoadCredential. The NixOS module’s services.tribuchet-worker.keyFile does this.

NixOS

Import tribuchet.nixosModules.default (flake input github:Mic92/tribuchet) and enable the services:

{
  # hub machine
  services.tribuchet-hub.enable = true;
  # optional: route this machine's nix-daemon builds through the hub
  services.tribuchet-hub.externalBuilders = {
    enable = true;
    systems = [ "x86_64-linux" "aarch64-linux" ];
  };

  # worker machines
  services.tribuchet-worker = {
    enable = true;
    settings = {
      hub = "https://hub.example.org:7437";
      # Concurrent builds. Defaults to the core count at runtime, up
      # to 64 (32 on darwin). Set explicitly to go beyond or below.
      # max-jobs = 128;
    };
  };
}

The hub unit is socket-activated. The worker unit reloads instead of restarting on package or settings changes, so running builds survive deploys.

macOS (nix-darwin)

tribuchet.darwinModules.default provides the same two services for launchd. The hub adopts its sockets from launchd. The worker daemon execs through a stable symlink that activation flips and then SIGHUPs, which again keeps builds alive across upgrades.

Container

For hosts without Nix the flake builds an OCI image, packages.x86_64-linux.worker-image. CI publishes the same image for x86_64-linux and aarch64-linux as ghcr.io/mic92/tribuchet-worker, tagged main and per release. It carries its own Nix store, starts a nix-daemon and the worker, and spawns build agents according to spawn-agents and agent-uid-base in worker.toml. It needs no added capabilities, but the sandbox creates namespaces and mounts, which the default runtime seccomp profile forbids. Use the profile from packages.x86_64-linux.seccomp-profile and unmask /proc:

$ podman run -d --name tribuchet-worker \
    -v /etc/tribuchet:/etc/tribuchet:ro \
    -v tribuchet-nix:/nix \
    --security-opt seccomp=$(nix build --print-out-paths .#seccomp-profile) \
    --security-opt unmask=ALL \
    ghcr.io/mic92/tribuchet-worker:main

The one extra syscall rule the sandbox needs is also available on its own in nix/seccomp-additions.json, to append to a base profile of your choice.

For docker replace unmask=ALL with systempaths=unconfined. On Kubernetes ship the profile as a Localhost seccomp profile, or fall back to Unconfined, and set procMount: Unmasked.

Compared to the NixOS module the agents get no delegated cgroup, so build-memory-max and uid-range builds are unavailable. The /nix volume is only a cache. The daemon garbage-collects it via the min-free and max-free settings baked into the image.

Prometheus metrics

Set metrics-listen = "127.0.0.1:7438" in hub.toml and the hub serves /metrics there, over plain HTTP.

GET /workers on the same port lists the connected workers as indented JSON, sorted by name, with name, systems and their features, max_jobs and connected_seconds.

Fixed-output network policy

On Linux workers with /dev/net/tun, fixed-output builds run in a private network namespace and reach the outside through the embedded presto-pasta user-mode NAT. The worker’s loopback services and abstract sockets are never reachable from there. On top of that the optional fod-network setting filters which destinations such builds may connect to. It lives in the worker’s freeform settings, so with the NixOS module it is plain Nix:

services.tribuchet-worker.settings.fod-network = {
  # action when no rule matches (default: "allow")
  default = "allow";

  # ordered rules, first match wins
  rules = [
    {
      action = "deny";
      dst = "private"; # loopback, RFC 1918, link-local, ULA, CGNAT, ...
    }
    {
      action = "allow";
      dst = "10.20.0.15"; # single IP or CIDR, IPv4 or IPv6
      ports = [ "443" ];
    }
    {
      action = "deny";
      proto = "tcp"; # "tcp", "udp" or "any" (default)
      dst = "any";
      ports = [
        "25"
        "465"
        "587"
        "8000-8999"
      ];
    }
  ];
};

Without the module the same structure goes into worker.toml as a [fod-network] table with [[fod-network.rules]] entries.

Each rule matches on the destination of a new outbound connection:

• dst: "any", "private" (everything non-public: loopback, RFC 1918, link-local, ULA, CGNAT, multicast), a single IP, or a CIDR like "192.0.2.0/24" or "2001:db8::/32".
• proto: "tcp", "udp" or "any".
• ports: destination ports, single ("443") or inclusive ranges ("8000-8999"). Empty or omitted means any port.

Rules are evaluated in order for every new flow before a host socket is created. Denied connections never leave the sandbox: a TCP SYN gets no answer. Rules are IP-based on purpose. Hostname rules would only apply to whatever a name resolves to at connect time, and a build resolving names itself bypasses them trivially. presto-pasta forwards DNS lookups to the host resolver independently of these rules, so a deny rule cannot break name resolution.

How a build flows

1. Nix execs tribuchet attach build.json. The shim submits the build to the hub over the unix socket.
2. The hub validates and dedupes the request and queues it for a worker serving that system and feature set.
3. The assignment lists the input closure. The worker answers with the paths and chunks it lacks, the hub streams those chunks, and the worker imports the paths through its nix-daemon.
4. The worker runs the builder in its sandbox. Logs stream live back to nix build.
5. The worker announces each output’s chunk list. The hub fetches the chunks it lacks, assembles and verifies the NAR, and unpacks it at the scratch path Nix provided. Nix finishes hashing and registration as if the build had run locally.

DESIGN.md describes the architecture, sandbox, security model and failure handling in detail. spec/ holds Quint models of worker staging and the transfer protocol, proven as flake checks.

Development

$ nix develop            # rust toolchain + protobuf
$ cargo test
$ cargo clippy --all-targets
$ nix build .#checks.x86_64-linux.nixos-test-builds     # end-to-end VM test (hub + worker)
$ nix build .#checks.x86_64-linux.nixos-test-nspawn     # NixOS-container build in the sandbox
$ nix build .#checks.x86_64-linux.nixos-test-lifecycle  # daemon restart/reload/stop sequence
$ nix build .#checks.x86_64-linux.spec-protocol         # inductive proof of spec/protocol.qnt

The VM tests exercise remote builds, hub and worker restarts and reloads mid-build, cancellation, log limits, uid-range and emulated builds, and fixed-output networking.

License

MIT