These new solid-state ACs promise a cool future. Scientists aren’t so sure.
Summary
Scientists and startups are developing solid-state air conditioners that use materials like gadolinium and bismuth telluride to move heat without refrigerants, but experts question whether they can match traditional AC efficiency.
<p>After three years of record-breaking heat, this one is <a href="https://www.almanac.com/summer-weather-forecast#:~:text=Watch%20for:,expected%20in%20July%20and%20August.">set to be yet another scorcher</a>. Air-conditioning? Not going anywhere. The International Energy Agency <a href="https://ourworldindata.org/air-conditioning-causes-around-greenhouse-gas-emissions-will-change-future">projects that the number of AC units will triple by 2050</a>. </p>
<p>That’s good for health—<a href="https://www.thelancet.com/journals/lancet/article/PIIS0140-6736(21)01787-6/fulltext">one <em>Lancet</em> study</a> estimated that AC prevented nearly 200,000 premature deaths in 2019 alone—but bad for the planet. Artificial chill already accounts for 7% of global electricity use and 3% of greenhouse-gas emissions, and if improperly disposed of, the units can leak refrigerants with more global-warming potential than carbon dioxide.</p>
<p>Feeling the heat, a number of scientists and startups are hoping to amp up solid-state cooling, which is currently used at a small scale for things like mini fridges, EV batteries, and some high-end gaming computers. Traditional ACs transfer heat by using a compressor and a fan to circulate a refrigerant and turn it from liquid to gas. </p>
<p>Solid-state systems, on the other hand, move heat through conductive materials like gadolinium and bismuth telluride—which could theoretically cool spaces and surfaces with fewer messy side effects. </p>
<p>The catch is whether they can match the efficiency of conventional AC. “One of the key questions that remain is why are the solid-state coolers not as efficient as typical thermodynamic cycles?” says Pramod Reddy, a professor of mechanical engineering at the University of Michigan who studies heat transfer. </p>
<p>Research and pilot programs are underway to test a range of approaches. Brooklyn-based Mimic Systems uses thermoelectric cooling, which passes a current through semiconductive materials to shift heat from one side to another. Its room-scale climate control system is <a href="https://praxisinstitute.org/pilot-novel-solid-state-cooling-and-heating-system-advancing-climate-resiliency-for-people-with-disabilities/">being piloted in an apartment in Vancouver</a>. </p>
<p>The German company Magnotherm is set to <a href="https://station-frankfurt.de/2026/04/08/magnotherm-and-rewe-group-launch-magnetic-cooling-pilot-in-german-supermarkets/">test its system</a>, which relies on a magnetocaloric setup that transfers heat by magnetizing and demagnetizing materials, in a chain of supermarkets. <a href="https://www.nature.com/articles/s41586-025-09946-4.epdf?sharing_token=XwbiMt-E3d3Xx-JEOKTcNNRgN0jAjWel9jnR3ZoTv0NUOc5QMn2XTcQS71i232YrugBT88BBCDF6JmZT9ZpN5fowB2_etJpIH5mon7I9mjrJqEYswy7nX0YcnjchNp3gpLiExsDP9MJVjsvyH3bcx8LmnRNbwE-4hjBHaP1HVcuZd5FS8s5W9NG9eO7hUegqS7sTpoLmR8KNmFETqOKPD7972H1sJ5I9A5Ws1zzDRnrLCefw8bQVf44xUkhz_2wc7V89CHTgDmB18VeAaVBQvw%3D%3D&tracking_referrer=spectrum.ieee.org">A team in Hong Kong</a> has announced that its elastocaloric device, whose material heats and cools as it expands and contracts, can dip below 0 °C. And the <a href="https://barocal.com/">UK’s Barocal</a> is betting on barocaloric systems, which change temperature in response to shifts in pressure. </p>
<p>But experts, especially in thermoelectrics, have doubts about how well any solid-state scheme can compete. For most modern HVAC systems, the coefficient of performance (COP) is 3, explains Jeff Snyder, a professor at Northwestern University who studies electrical and thermal conductivity. That essentially means the system moves three units of heat for every unit of energy that goes into it. </p>
<p>Thermoelectrics in particular tend to have a much lower performance at high levels of temperature change, Snyder says, which means they’re best suited for niche uses such as cooling the back of a car seat. </p>
<div class="wp-block-image">
<figure class="wp-block-image size-large"><img decoding="async" height="2000" width="1500" src="https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?w=1500" alt="brown HVAC unit below a window" class="wp-image-1138637" srcset="https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg 1826w, https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?resize=225,300 225w, https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?resize=768,1024 768w, https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?resize=1500,2000 1500w, https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?resize=1152,1536 1152w, https://wp.technologyreview.com/wp-content/uploads/2026/06/IMG_3420.jpg?resize=1536,2048 1536w" sizes="(max-width: 1500px) 100vw, 1500px" /><figcaption class="wp-element-caption">Mimic’s room-scale thermoelectric HVAC unit is being tested in a Vancouver apartment.</figcaption><div class="image-credit">COURTESY OF MIMIC SYSTEMS, INC</div>
</figure>
</div>
<p>Efficiency, however, isn’t everything, argues Lindsay Rasmussen, a manager at the Rocky Mountain Institute’s climate tech accelerator Third Derivative, which supports both Magnotherm and Mimic. In the US, most ACs currently in use employ a refrigerant called R410A, which has a global-warming potential more than 2,000 times that of carbon dioxide. Plus, their moving parts can make them less durable, especially compared with a solid-state model that’s less mechanically complex.</p>
<p>Still, a dearth of units makes it hard to answer the efficiency question. To understand how well alternatives work, says Rasmussen, researchers need to compare their long-term energy consumption with that of conventional models instead of simply looking at COP. Mimic claims, for example, that its room-scale model should match the draw of a typical AC unit over the course of a year. Elastocaloric and barocaloric systems also have promise, Rasmussen adds, but room-scale prototypes are probably two to three years away. </p>
<p>In the end, the likelihood that solid-state cooling could replace compressor-based AC is slim. But as the planet warms and places like India install tens of millions of new AC units over the next decade, supplanting even a small number could make a dent. “If [solid-state] could take over even a 5% market share,” Rasmussen says, “that is a really large potential impact.” </p>
<p><em>Sara Kiley Watson is a science journalist specializing in climate and sustainability. She’s based in The Hague.</em></p>
View Cached Full Text
Cached at: 06/15/26, 02:57 PM
# These new solid-state ACs promise a cool future. Scientists aren’t so sure.
Source: [https://www.technologyreview.com/2026/06/15/1138552/solid-state-acs-promise-cool-future](https://www.technologyreview.com/2026/06/15/1138552/solid-state-acs-promise-cool-future)
Feeling the heat, a number of scientists and startups are hoping to amp up solid\-state cooling, which is currently used at a small scale for things like mini fridges, EV batteries, and some high\-end gaming computers\. Traditional ACs transfer heat by using a compressor and a fan to circulate a refrigerant and turn it from liquid to gas\.
Solid\-state systems, on the other hand, move heat through conductive materials like gadolinium and bismuth telluride—which could theoretically cool spaces and surfaces with fewer messy side effects\.
The catch is whether they can match the efficiency of conventional AC\. “One of the key questions that remain is why are the solid\-state coolers not as efficient as typical thermodynamic cycles?” says Pramod Reddy, a professor of mechanical engineering at the University of Michigan who studies heat transfer\.
Research and pilot programs are underway to test a range of approaches\. Brooklyn\-based Mimic Systems uses thermoelectric cooling, which passes a current through semiconductive materials to shift heat from one side to another\. Its room\-scale climate control system is[being piloted in an apartment in Vancouver](https://praxisinstitute.org/pilot-novel-solid-state-cooling-and-heating-system-advancing-climate-resiliency-for-people-with-disabilities/)\.
The German company Magnotherm is set to[test its system](https://station-frankfurt.de/2026/04/08/magnotherm-and-rewe-group-launch-magnetic-cooling-pilot-in-german-supermarkets/), which relies on a magnetocaloric setup that transfers heat by magnetizing and demagnetizing materials, in a chain of supermarkets\.[A team in Hong Kong](https://www.nature.com/articles/s41586-025-09946-4.epdf?sharing_token=XwbiMt-E3d3Xx-JEOKTcNNRgN0jAjWel9jnR3ZoTv0NUOc5QMn2XTcQS71i232YrugBT88BBCDF6JmZT9ZpN5fowB2_etJpIH5mon7I9mjrJqEYswy7nX0YcnjchNp3gpLiExsDP9MJVjsvyH3bcx8LmnRNbwE-4hjBHaP1HVcuZd5FS8s5W9NG9eO7hUegqS7sTpoLmR8KNmFETqOKPD7972H1sJ5I9A5Ws1zzDRnrLCefw8bQVf44xUkhz_2wc7V89CHTgDmB18VeAaVBQvw%3D%3D&tracking_referrer=spectrum.ieee.org)has announced that its elastocaloric device, whose material heats and cools as it expands and contracts, can dip below 0 °C\. And the[UK’s Barocal](https://barocal.com/)is betting on barocaloric systems, which change temperature in response to shifts in pressure\.
But experts, especially in thermoelectrics, have doubts about how well any solid\-state scheme can compete\. For most modern HVAC systems, the coefficient of performance \(COP\) is 3, explains Jeff Snyder, a professor at Northwestern University who studies electrical and thermal conductivity\. That essentially means the system moves three units of heat for every unit of energy that goes into it\.
Thermoelectrics in particular tend to have a much lower performance at high levels of temperature change, Snyder says, which means they’re best suited for niche uses such as cooling the back of a car seat\.
Mimic’s room\-scale thermoelectric HVAC unit is being tested in a Vancouver apartment\.COURTESY OF MIMIC SYSTEMS, INC
Efficiency, however, isn’t everything, argues Lindsay Rasmussen, a manager at the Rocky Mountain Institute’s climate tech accelerator Third Derivative, which supports both Magnotherm and Mimic\. In the US, most ACs currently in use employ a refrigerant called R410A, which has a global\-warming potential more than 2,000 times that of carbon dioxide\. Plus, their moving parts can make them less durable, especially compared with a solid\-state model that’s less mechanically complex\.
Still, a dearth of units makes it hard to answer the efficiency question\. To understand how well alternatives work, says Rasmussen, researchers need to compare their long\-term energy consumption with that of conventional models instead of simply looking at COP\. Mimic claims, for example, that its room\-scale model should match the draw of a typical AC unit over the course of a year\. Elastocaloric and barocaloric systems also have promise, Rasmussen adds, but room\-scale prototypes are probably two to three years away\.
In the end, the likelihood that solid\-state cooling could replace compressor\-based AC is slim\. But as the planet warms and places like India install tens of millions of new AC units over the next decade, supplanting even a small number could make a dent\. “If \[solid\-state\] could take over even a 5% market share,” Rasmussen says, “that is a really large potential impact\.”
*Sara Kiley Watson is a science journalist specializing in climate and sustainability\. She’s based in The Hague\.*
Similar Articles
Solid-state batteries still aren’t ready, but gels are
Despite decades of hype, solid-state batteries remain unready for mass production, but semi-solid-state (gel) batteries are now entering the market, offering improved safety and longevity for power banks and e-bikes at a slightly higher cost.
Startup’s nuclear-inspired cooling system could make data centers more sustainable
Ferveret, an MIT spinout, has adapted nuclear reactor heat transfer techniques to create a liquid cooling system for data centers that improves computational power efficiency by 15% and allows 35% more tokens per watt, using zero water.
Cooling at the Speed of Light
An article about a new cooling technology that uses light to achieve rapid cooling, potentially revolutionizing thermal management in electronics and other fields.
The Download: cutting AC emissions, and nature’s drug designer
This newsletter covers three tech stories: solid-state air conditioning aiming to cut emissions, a chemist using AI to design drugs for animals, and Anthropic shutting down access to its top AI models after a US directive.
DARPA is funding room-temperature fusion in solids. They call it MARRS. They explicitly avoid the word "cold fusion." The national security justification is already public.
DARPA's MARRS program explores solid-state fusion near room temperature, with parallel international developments in LENR from India, Japan, and China, potentially transforming AI compute infrastructure if realized.