Contact Lens Uses Microfluidics to Monitor and Treat Glaucoma

# Smart Contact Lens Automates Glaucoma Drug Dosing Source: [https://spectrum.ieee.org/smart-contact-lens-glaucoma-microfluidics](https://spectrum.ieee.org/smart-contact-lens-glaucoma-microfluidics) More than 80 million people[suffer from glaucoma globally](https://glaucoma.org/articles/glaucoma-worldwide-a-growing-concern), making it the second most common cause of blindness worldwide\. The disease—caused by elevated internal eye pressure damaging the optic nerve—is incurable, but its progression can be slowed with drugs to control eye pressure\. Now, researchers have developed an electronics\-free[smart contact lens](https://spectrum.ieee.org/smart-contact-lens-detects-diabetes-and-glaucoma)that can track the disease in real time and also deliver drugs in response\. The all\-polymer lens includes a microfluidic sensor that monitors eye pressure, as well as pressure\-activated drug reservoirs that dispense medicine as eye pressure rises\. “A lot of patients forget to take the medicine at the right time,” says[Yangzhi Zhu](https://terasaki.org/institute/yangzhi), an assistant professor at the Terasaki Institute for Biomedical Innovation\. “For our technology, we don’t need the user to manually operate or trigger\. Everything is based on the sensor and the closed\-loop drug delivery\.” ## A Contact Lens for[Glaucoma](https://spectrum.ieee.org/tag/glaucoma)Treatment The gold\-standard approach for measuring eye pressure requires patients to visit a clinic, and checkups are often months apart\. This provides infrequent snapshots that often fail to accurately measure glaucoma’s dynamics\. In addition,[previous research](https://www.ajo.com/article/S0002-9394(05)00557-X/abstract)has found that nearly half of patients stopped treating the disease within six months of filling an initial prescription\. There have been earlier efforts to treat[glaucoma](https://spectrum.ieee.org/glaucoma-test)with smart contacts\. In 2016, the U\.S\. Federal Drug Administration[approved a device](https://www.fda.gov/news-events/press-announcements/fda-permits-marketing-device-senses-optimal-time-check-patients-eye-pressure)called[Triggerfish](https://www.sensimed.ch/sensimed-triggerfish/), which embeds electronic components into a lens to provide continuous eye\-pressure monitoring\. And other research groups have built[electronic smart contact lenses](https://www.nature.com/articles/s41467-022-34597-8)that combine pressure measurement and drug release\. But Zhu says the mechanical mismatch between rigid electronic components and delicate corneal tissue can lead to irritation and discomfort\. “Frankly speaking, we know that electronic control is the most accurate, but the issue is that it is not user\-friendly and not biocompatible, or comfortable for long\-term use,” he says\. “So we needed to find a better balance between the accuracy and the user comfort\.” The solution he and his colleagues came up with was to create a soft, all\-polymer lens that relied on[microfluidics](https://spectrum.ieee.org/tag/microfluidics)to sense pressure and release drugs as needed\. Microfluidics uses networks of microscopic channels and chambers to manipulate fluids\. It’s normally used in biological analysis or medical[diagnostics](https://spectrum.ieee.org/tag/diagnostics)\. Yangzhi Zhu/Terasaki Institute for Biomedical Innovation The researchers used 3D\-printed molds to embed tiny microchannels and reservoirs into the bottom layer of their contact lens\. These reservoirs were then filled with a specially designed silk sponge that can quickly absorb up to 2,700 times its weight in fluid\. One of the reservoirs is filled with a red fluid to measure pressure\. When eyeball pressure rises, it compresses the reservoir enough to push the red liquid further down a snaking microchannel\. A phone\-based imaging app with a convolutional neural network trained on images of these microchannels in different states can provide a pressure readout with 94 percent accuracy\. Two drug\-filled reservoirs make up part of the[drug\-delivery](https://spectrum.ieee.org/tag/drug-delivery)system\. These reservoirs are connected to microchannels that deliver medicine to the surface of the eye\. As pressure in the eye increases, the reservoir is compressed, and the drug is pushed through the channels\. The threshold at which this happens can be tailored by adjusting the width of the channel, making it possible to tune[drug delivery](https://spectrum.ieee.org/tag/drug-delivery)and even administer two different drugs at different pressure levels\. ## Microfluidic Pressure Sensors and Drug Delivery Zhu says the prototype device, reported in a[paper published on 8 April](https://www.science.org/doi/10.1126/scitranslmed.ads9541)in**Science Translational Medicine,**can hold enough medicine for up to two weeks of use\. The narrow design of the microchannels means the pressure sensor and drug release mechanism only respond to the sustained buildup of pressure characteristic of glaucoma and not short, sharp pressure spikes caused by things like blinking or swallowing\. In tests on rabbits, the team demonstrated that the closed\-loop drug delivery enabled by the[smart contact lens](https://spectrum.ieee.org/tag/smart-contact-lens)was as effective as conventional treatment with eye drops, while also enabling accurate monitoring of eye pressure\. They also recorded no inflammation or other biocompatibility issues over 14 days of repeated use\. The new device is an elegant solution for combining pressure sensing and drug delivery while avoiding the comfort and safety concerns associated with the use of electronic components, says[Chi Hwan Lee](https://engineering.purdue.edu/ME/People/ptProfile?resource_id=127246), a professor of biomedical and mechanical engineering at Purdue University\. “These are important considerations for long\-term wear and real\-world adoption, particularly in a chronic condition such as glaucoma\.” However, Lee notes that ditching electronics comes with trade\-offs including reduced precision and robustness\. More importantly, the fact that pressure readings require the user to hold a smartphone up to their eye means that monitoring is not continuous\. This is a significant limitation, he adds, as glaucoma often features transient spikes and fluctuations in eye pressure, often outside of waking hours, that are clinically relevant and would be missed by this system\. Nonetheless, Lee thinks the technology could be a useful complement to electronics\-based approaches\. “When used alongside electronic systems, they could offer a synergistic strategy—providing a simpler, low\-cost, and potentially more comfortable option for intermittent or threshold\-based monitoring and therapy, while electronic devices deliver continuous, high\-resolution data,” he says\. One major advantage of the approach, says Zhu, is that the fabrication process is already well aligned with existing contact lens manufacturing approaches\. And all of the information required to personalize the contact lenses for specific patients could be collected by clinicians during the standard process used to fit contact lenses\. Zhu and his collaborators are already working toward commercialization of the technology and have applied for a provisional patent\. And while the focus is currently on glaucoma, he thinks the platform they’ve developed could ultimately be extended to a host of eye diseases, including dry eye, diabetic retinopathy, and age\-related macular degeneration\.