Essenceia/CRC_generator

Source: https://github.com/Essenceia/CRC_generator

CRC Generator for Verilog or VHDL

Description

CRC Generator is a command-line application that generates Verilog or VHDL code for CRC of any data width between 1 and 1024 and polynomial width between 1 and 1024. The code is written in C and is cross-platform compatible.

Build

To build on linux using gcc:

g++ -o crc_gen crc_gen.cpp

Usage

Invoke the tool via command line:

./crc_gen [language] [data_width] [poly_width] [poly_string]

Options:

• language: verilog or vhdl
• data_width: data bus width {1..1024}
• poly_width: polynomial width {1..1024}
• poly_string: a string that describes CRC polynomial, eg: Ethernet MAC FCS uses poly 04C11DB7

Notes on poly_string

Examples:
05 = x^5+x^2+1
8005 = x^{16} + x^{15}+ x^2+ 1

The string representation (0x05, 0x8005) doesn’t include highest degree coefficient in polynomial representation (x^5 and x^{16} in the above examples).

Output Examples

Printing usage:

./crc_gen

usage:
	crc-gen language data_width poly_width poly_string

parameters:
	language    : verilog or vhdl
	data_width  : data bus width {1..1024}
	poly_width  : polynomial width {1..1024}
	poly_string : polynomial string in hex

example: usb crc5 = x^5+x^2+1
	crc-gen verilog 8 5 05

Generation in action:

./crc_gen verilog 2 4 3

//-----------------------------------------------------------------------------
// Copyright (C) 2009 OutputLogic.com
// This source file may be used and distributed without restriction
// provided that this copyright statement is not removed from the file
// and that any derivative work contains the original copyright notice
// and the associated disclaimer.
// THIS SOURCE FILE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS
// OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED	
// WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
//-----------------------------------------------------------------------------
// CRC module for
//	 data[1:0]
//	 crc[3:0]=1+x^1+x^4;
//
module crc(
	input [1:0] data_in,
	input        crc_en,
	output [3:0] crc_out,
	input        rst,
	input        clk);

	reg [3:0] lfsr_q,
	           lfsr_c;
	assign crc_out = lfsr_q;
	always @(*) begin
		lfsr_c[0] = lfsr_q[2] ^ data_in[0];
		lfsr_c[1] = lfsr_q[2] ^ lfsr_q[3] ^ data_in[0] ^ data_in[1];
		lfsr_c[2] = lfsr_q[0] ^ lfsr_q[3] ^ data_in[1];
		lfsr_c[3] = lfsr_q[1];


	end // always

	always @(posedge clk, posedge rst) begin
		if(rst) begin
			lfsr_q  <= {4{1'b1}};
		end
		else begin
			lfsr_q  <= crc_en ? lfsr_c : lfsr_q;
		end
	end // always
endmodule // crc 

Archived version

This repository is a mirror of the version currently found on source forge, duplicated here in an effort to no help preserve this tool into the future. I, Julia Desmazes, have not contributed in any way to the development of this tool, all credit belongs to the original author.

In addition to being a command line tool, this tool also used to be available interactively though the now defuncts OutputLogic website.

About the original author

Evgeni Stavinov is the creator and main developer of OutputLogic.com. Evgeni has more than 20 years of diverse design experience in the areas of FPGA logic design, embedded software and communication protocols. He holds MSEE from University of Southern California and BSEE from Technion – Israel Institute of Technology. For more information contact [email protected]

License

This code is licensed under MIT license, all rights reserved to Evgeni Stavinov. See LICENSE for more details.